Linksys Wireless-G WRT54G Router "ok ethernet light blink modem" Questions

...ok to see the ethernet light to be off. >DSL, this light should always be STEADY which means the server where you get your internet service is fine. If it's blinking or RED, it's otherwise. If DSL ...

...OK, you can now power off your modem and connect an ethernet cord with RJ45 plugs on each end between the Ethernet Jack on your Modem and the Modem In Jack on your Router. Next , follow the ...

ethernet on back of cpu. the power light and wireless light is on the router and the modem light is blinking in sync with the modem. the #4 port on the router is lit but not blinking. can you help me.

...OK button. 3. The ?IP Configuration? window should appear, select the Ethernet Adapter that the PC is using from the drop down list. 4. Make note of the ?Adapter Address? which is the MAC Address. ...

...ethernet.......click your start button on your desktop, click the "run" near the control panel button....a little window pops up down by the start button....type the letters cmd (short for command) ...

ethernet cable from the modem to your router if your connected via wireless connection) 2) make sure that the DSL light on your modem is solid and not blinking. 3) check if your able to connect to the

...ethernet port of the router step6: check the lights at the front panel of your router, make sure the the power light is steady lit, internet light is blinking, the wireless and #1 lights are lit as ...

...ethernet cable from the cable modem directly to the laptop it connects, put the same cable into the netgear, lights come on but no connection? Thanks in advance for the help! I suppose you pluged the ...

...ok, and i am getting the green lights. my operating system is windows vista, and in no way it allows me to connect to the internet. my computer is a sony vista VGN-NR180E. the verizon tech is telling ...

...Ethernet card (it will look like this: Auto-Negotiation, 10Mb Full, 100 MB Half, etc..). You want to select 10mb Full Duplex. Step 6 Keep clicking OK until you get to the desktop. Your computer may ...