Linksys Wireless-G WRT54G Router "dhcp client service" Questions

...DHCP client list of Belkin router having problems adding a new lap top to the DHCP client list of my Belkin wireless G router go to 192.168.2.1 but do not find the menu particularly helpful! can find ...

...DHCP Client", double click on it (or right click and choose properties), STOP the service, then set it's startup type to 'manual'. That'll kill it. See DHCP is what "Gives out/assigns addresses" and ...

...OFF DHCP. go START>>RUN>>services.msc (enter) when services window comes up, scroll down to DHCP, set to OFF and Disable, reboot, now try again. This should be done on ALL client

...DHCP as part of the router's configuration screens. (My netgear router supports client mode. The 2wire supports bridged and router mode. My 2wire is the main router. I set up my netgear using my ...

...Also ensure DHCP is set to OFF and disabled on ALL client computers. START>>RUN>>services.msc enter, When services comes up, scroll down to DHCP and set to OFF & Disable.

client pc if you don't want to enable DHCP in the router. when you see Local Only message it means that your pc hasn't detected a route to the outside network ( internet ) without a proper gateway you

...You need to turn OFF DHCP on your laptop Desktop. Click start and then run. Type services.msc and click ok. Scroll down the list and double click on DHCP client and click stop and set it to

on it and click on start/ restart and then look for DHCP Client, again right click on it and click start/ restart. or just reply once you've performed the second step and i'll tell you what to do next

...DHCP CLIENT, DNS CLIENT, WIRED AUTOCONFIG, REMOTE ACCESS AUTO CONNECTION MANAGER, AND NETWORK LOCATION AWARENESS, are all enabled and set in AUTOMATIC MODE, make sure you CLICK START to begin the ...

...DHCP client service is started and startup type is automatic. That doesn?t work, It?s set on automatic already and when I click to start the service it saying ?The DHCP Client service on Local ...