Question about Logitech Audio Players & Recorders
and both are OK. This is a 5.1 setup. When I tested sound blaster Audigy 2 dianostics, each channel played but right channel came out of left channel. Can someone have an answer. Thanks fix your wires
Question about Creative Labs Audio Players & Recorders
...left channel on the M51132L (pin two on the M51132L between the heat sink and the connectors) appears to have failed. It was sitting at an operating point of around 11 volts (should be 5.4V as the ...
...left and right speakers is very low and i can barely hear it. I tried adjusting the volume of the single speakers and installing the drivers but still no difference. The other speakers work perfectly ...
left channel. Anyone else have this problem? I'd appreciate any help/suggestions! Thanks Nick I'm having this same problem and have sort of solved it with a really wierd technique I found at Logitech.
...left front channel by chopping off one of the input leads close to the 3.5 mm stereo jack that goes into the PC and joining on the leads from a new one. At first I thought the fault lay in the main ...
left channel), yellow (right channel), and black (ground), You need to remove and resolder all three wires. 6. The problem is that the existing stereo input cable develops an open circuit somewhere in
channel and white for the left, and they'll be clearly marked as audio outputs. Not all sets have audio outputs, though, while they usually have audio and video inputs. So if you find RCA jacks on the
215 questions posted
Usually answered in minutes!
480 Questions
173 Questions
150 Questions
129 Questions
110 Questions
