Canon EOS 600D Rebel T3i Digital Camera "dropped camera check" Questions

...camera, the flash, the card? I reformated the card and it still does it sounds like a shutter leaf dropping into the image. however, they are usually horizontal and more likely to manifest when in ...

Built in flash will not work i put it on P mode still nothing i paid good money for this camera for this to happen also have bought the 580 ex speedflash 10-22mm ultra lens ef 70-300 lens and would ...

...camera body. Usually the screen will have dropped down very slightly and it's held in place by clips to the front and rear. The rear clip is fixed, the front one is a spring clip. Avoid using bare ...

...camera was used daily and only failed when I dropped it in water. I think Fiddy01 is on the right track with the noise being the two flash guides. I have an XTi and that rattle is common. to check if ...

...check for this, try a different card. (Any card will work for photos.)3. Failing the other two, either the camera is producing corrupted data, or your image viewer is not capable of reading them. To ...

...dropped camera.Little lens with the focusing square now flopping. Takes pics the image in view finder not focused but picture is There is a wheel small wheel next to the viewfinder to allow you to ...

...dropped my camera. It will not power on. Does anyone have any idea what I may have done? I have checked the battery and it works fine in other cameras. My closest repair center appears to be NJ. I ...

...CHECK UP OF THE CAMERA, OMETIMES IS NOT WORKING PROPERLY It sounds like you need to send camera and flash in to Canon for service. Call them to set it up, it's free tech support and they will email ...

...s will short out the power board or Main board, It Needs to be takin apart and find that or many loose screws and resealed. (Come's from Camera being dropped or something like that!) ...

...Camera was not dropped. I originally thought it was my strap! It is not a clean line. It does not appear in any other of the modes and not on the auto mode. Lighting conditions do not matter. I have ...