Question about Xerox Documate Office Equipment & Supplies
...Documents ~ Transferring Scanned Documents to Storage ~ Checking the Hardware and Setting the Lamp Power Saving ] Scanning with the TWAIN Interface from PaperPort [ Accessing the TWAIN
Question about Xerox Documate Office Equipment & Supplies
...before the scanner powers down, from 1 minute to a maximum of 3 hours. 3. Click the arrows for the Lamp timeout setting and choose a time setting. To return the scanner to its factory settings,
Question about Xerox Documate Office Equipment & Supplies
Canon Scanner 5000F fails when adjusting lamp before scan. Using Canoscan program start to scan, Message given :"adjusting lamp" Then after peroid of time Message given: "Can not scan, Reason: Lamp ...
adjusting the lamp When i use my 4200f i always get the message "adjusting the lamp please wait" it sits there for 2-3 minutes and then cracks into life,is this correct? or can i do something about it
Question about Xerox Documate Office Equipment & Supplies
...of the CCD amplifier is adjusted (sheet guide is read) during scanning.Probable causes are:- The lamp, optical system or white sheet guide is dirty- Defective lamp, heater, CCD, or inverter- ...
...There is a lamp shut-off time adjustment in ScanGear. Go into ScanGear's Advance Mode and click Preferences. One of the four tabs will have an option for Lamp Shut-Off time. Set it as
...adjustment of the CCD amplifier does not succeed at a READ command for the first document, or during scanning. Probable causes: - The lamp, the optical system or white sheet guide is dirty. - ...
...may not be set correctly. - The film adapter unit protective sheet may be put in place. the lamp may not be wamed up. (it takes a few minutes for adjusting lamp on low temperature) Scanner ...
...me what is wrong and how to approach fixing it? Thanks so much. Crysti Esper I think your flatbed lamp is damage if u replace or color it pure white ...
Question about Xerox Documate Office Equipment & Supplies
...across the top of the image. It looks like the scanner is starting before the paper goes across the lamp. If you set Automatic brightness/Contrast this happens. Try manual setting. Adjust different ...
30 questions posted
Usually answered in minutes!
86 Questions
44 Questions
32 Questions
19 Questions
1 Questions