green cover and manipulate that flag to an Up and to the up position and replace the cover and install the drum in the machine, once the machine runs it will swipe the switch and reset the drum count,
Question about Xerox Office Equipment & Supplies
green cover and manipulate that flag to an Up and to the up position and replace the cover and install the drum in the machine, once the machine runs it will swipe the switch and reset the drum count,
green cover back on That flag has to be in the up position when new. It passes down and actuates a drum reset switch on the machine. When that is back in the up position. re insert the drum and on the
green cover back on That flag has to be in the up position when new. It passes down and actuates a drum reset switch on the machine. When that is back in the up position. re insert the drum and on the
...flag in the drum unit falls down during shipping and does not swipe the drum replacement switch. You can do one of 2 things, Exchange the drum cartridge or, on the front of the cartridge you have to ...
sticking out of a segmented gear. You have to get the gears and flag set so that the the flag is up and to the right. It will then make one swipe pass the drum replacement switch and reset the counter
...flag by itself also. The way to see if your machine has the same problem, is if you get a jam and you open the right side door, push the black gate and see if it moves a little bit. If it was stuck ...
Question about Xerox Office Equipment & Supplies
...replacement switch. You can try and reset to the up and to the right position, or have the cartridge replaced. That is a horribly common problem. But that flag only makes 1/2 of a revolution when it ...
...replacement gearbox is available for machines with lower serial numbers. For the machines with serial numbers between A03U010000788 and A03U010001446 the fuser gearbox is already updated and only ...
28 questions posted
Usually answered in minutes!
534 Questions
436 Questions
284 Questions
267 Questions
262 Questions