Xerox WorkCentre XD100 All-In-One Laser Printer "try adf place paper" Questions

try to smooth out the damaged portions. 4. Reload your original, with the print side up, into the ADF tray. Place the pages so that the top edge of the document goes in first. Slide the paper into the

ADF paper-edge guides until they touch the paper.Select Fax.Enter the fax number.Press Send. If the error continues, power cycle the printer: Turn off the printer.Disconnect the power adapter from the

...So, I actually ended up having to place an actual piece of paper into the ADF slot, and pressed OK. Once it pushed the paper through, the message disappeared and I was able to print

try to fax something the paper get stuck in top feeder.Any suggestions! Lift the cover to the ADF (Automatic Document Feeder) and remove any paper debris from the rollers. Also, clean the rollers with

...adf unit, there might be a bad/defective sensor, try placing a letter size sheet on the document glass and make a copy, if it copies you have a problem with the adf, and it needs to be serviced Ricoh ...

...ADF after that. I tried everything, and then started to retrace my steps of all the things I might have tinkered with to try and get the copying working in the first place, before the paper jam. Then ...

Try printing a document. If the issue is resolved, do not continue troubleshooting. If the issue continues, proceed to the next step. If you would prefer to view a video with audio instructions, click

place, stuck or something on it. There should be a door on the adf and maybe on the bottom as well, lift it up as if making copies on the glass and look into the adf is there any foreign object there,

...ADF cover Lift up Pickup roller Assy remove spring from pickup roller assy Remove pickup roller assy gently pull it towards you Carefully remove green plastic diverter note this is held in place by 4 ...

...ADF until you hear a beep. If you are already following these guidelines but problem continues, it could be a hardware problem in the feeder's mechanism. Please contact Lexmark technical support ...