Xerox WorkCentre XD100 All-In-One Laser Printer "port connected check" Questions

...CONNECTED THROUGH USB CABLE TO MY PC. AND I WANTS TO CONNECT IT THROUGH LAN CABLE SO PLEASE TELL ME THAT WHAT CAN I DO OR WHICH CABLE(CROSS CABLE OR STRAIGHT CABLE) AND HOW PLEASE SEND ME DETAILS ON ...

port not working first you check it USB driver installed or not, or USB connect to motherboard or not. PC there are two side USB available one is front side and sec is back side. You connect only back

...is set to the correct method ie usb for usb connector or parellell port TCIP if connected with a network cable..if you have it connected with a network cable you will have to enter the ip address

...port. If you have the printer connected to a USB hub, skip the hub and directly connect to the computer. Check if other devices work at the USB ports. Sometimes ports do fail; either they can't ...

port (if you are already directly connected to the computer). Check if a known working device works in the port. Ports can burn out under some situations. Try a brand new cable as well. In some cases,

...port, when connected to your pc, does your device manager revognize the device?. If it doesn't then check the cable and the port on the computer as well as on the printer. If you do see a connection, ...

port (check seting from the port (THE SPEED HAVE TO BE THE SAME) if connect with USB, if necessery, install the driver again and test. if necessery flash the firmware and test (worst case scenario) if

...port Loaded driver from cd. Loaded ok. When itwas checking the connection got message check connection. Went to hardware printer is there with a question mark. Clicked on printer message said ...

...port problem, could not connect with PC Hi, I have Canon MP145. My computer does not recognize the printer, it is connected using USB cable, power is on, drivers installed. I checked the printer ...

...and shows check network connection look at the connection on the copier, is there a green light when the cable is plugged in? if no there is a problem with cable or port. have IT check port or