...arrow until COM 10 or executive comes up and the select OK. Then print what you want . You have to look at the printing properties on the driver to make sure you have auto or the bypass tray ...
Question about Canon Office Equipment & Supplies
...AUTO. Also, the document you are using has print settings of its own - check them as they will overide the tray you select. Select from within your document file - options - printer then look through ...
...print. If you leave it on auto tray it will use the tray that matches your paper type and weight. In your print driver, you need to go to the Printer Features -> Media 1 window and specify "Thick 2" ...
...for by pass tray, use custom measurement,input the size of the envelopes ( in X Y mode ). When you print, go to the properties and change the paper tray select from auto to by pass tray. Good
...print from tray 1 or 2. When i go to page setup, in paper I select A4, then I select "default tray (auto tray select)" The printer prints the first page from tray 1 then insists i add paper to the ...
...print. Believe defaults are set to #10 envelope. Envelope options - check / click on the following: face up, clockwise rotation and "Feed from" Auto Select. Click on / highlight the 5th envelope ...
Question about Minolta Office Equipment & Supplies
...auto configuration' and click on that. Then hit 'apply' at the bottom of the window. This will allow the print drivers to fully recognize the configuration of your copier/printer, and you should then ...
Question about Canon Office Equipment & Supplies
...to print ) and on machine ( when you put envelope on bypass, machine auto ask you ). Do not forget to tell printer that he needs to take paper from bypass ( printer properties ) Hope that ...
Question about Xerox Office Equipment & Supplies
...print side face-down in the tray. NOTE: Load a maximum of 10 envelopes into the tray at one time. Do not exceed the MAX fill line on the tray. The envelope may wrinkle depending on its weight and ...
Question about Xerox Office Equipment & Supplies
Press Start. The auto gradation routine will run and a message will display upon completion. Take the print from the output tray. Follow the instructions on the screen to complete the color correction
173 questions posted
Usually answered in minutes!
534 Questions
436 Questions
284 Questions
267 Questions
262 Questions