...scanner issue (parrt RG5-5100 Error 51.X is a loss of beam-detect occurred.Possible reasons: 1 - Beam-detect error 2 - Laser error 1. Press GO. The page containing the error will automatically be ...
Question about Ricoh Office Equipment & Supplies
...Error/Scanner Start Charge Current Leak Abnormal SC302 Charge Corona Output Error 3 SC131 F-Gate Asserted During Shading Grid Voltage Error Charge Roller Current Leak SC142: White level detection ...
...Scanner return trouble L4 01 Main motor lock detection 11 Shifter motor trouble L6 10 Polygon motor lock detection L8 01 No full wave signal U2 04 EEPROM read/write error (serial communication ...
...Error detection on any of scanner motor, laser unit, and BD detection at scanner area. Remedy When the same error repeatedly occurs after several times of turning the power OFF/ON, execute the ...
...detect error with your laser scanner. HP LASER PRINTERS 4200, 4300, 4250, 4350 ERROR 51.XX 1. Printer has a beam detect error 2. Replace the cable ***'y from scanner to D.C. controller 3. Replace ...
Question about Office Equipment & Supplies
...detect the scanner from my laptop and Acrobat Im I am using Ricoh C2030 multifunctioner in windows 7 OS. Whenever i am trying to scan the error msg occuring "36851 no response from the ...
...detect error 2 = Laser error 1. Press GO. The page containing the error will automatically be reprinted. 2. Turn the printer off and then on. 3. Reseat cables to the laser/ scanner and engine ...
Question about Canon Office Equipment & Supplies
...Scanner HP error Remedy 1. Connector disconnection/open circuit of the Scanner HP Sensor (SR2).2. Failure of the Scanner HP Sensor (SR2).3. Failure of the Scanner Motor (M1).4. Failure of the Reader ...
That code is a scanner error. The scanner unit can not detect the home position or the scanner unit warming up is not done properly at power on. Most of the time the Scanner unit needs to be replaced
...detect my scanner first shut down ur pc disconnect the power cable and usb cable from scanner put the power cable of scanner and see if light is coming if itis coming connect the usb cable check in ...
674 questions posted
Usually answered in minutes!
436 Questions
284 Questions
267 Questions
262 Questions
214 Questions