Xerox WorkCentre 385 Laser Printer "fax test" Questions

...Test the fax setup from the control panel Follow the steps below to perform a fax diagnostics test. Set up the all-in-one for faxing according to the setup instructions found in the product's User's ...

...fax To test the fax setup from the product control panel, follow these steps. Press the power button ( ) to turn off the HP fax product. Wait 20 seconds and then press the power button ( ) to turn on ...

...test your fax setup to check the status of the device and to make sure it is set up properly for faxing. Perform this test after you have completed setting up the device for faxing. The test does the ...

...test your fax setup to check the status of the device and to make sure it is set up properly for faxing. Perform this test after you have completed setting up the device for faxing. The test does the ...

Fax no. to test. Send any test page as fax on the 1-888-473-2963 and wait till it is send. Once the fax is sent, you will receive a fax as notification ( confirmation ) of the fax being received by HP

...Fax Test, and then press OK. The fax diagnostic test prints. Review the results of the test. If the test lists faxing issues and solutions, the fax test failed. Follow the solutions on the printed ...

...Fax Test The telephone number for this service is 1-888-HPFaxme (1-888-473-2963). The fax service receives faxes and returns faxes within 5 to 7 minutes to the number contained in the fax header. ...

...fax test 1.Make sure the product is turned on and correctly connected to the telephone jack. 2.Make sure that there is plain white paper in the input tray. 3.On the product control panel, press the ...

...Fax Test. The HP all-in-one displays the status of the test on the color graphics display and prints a report. 4. Review the report. * If the test passes and you are still having problems faxing, ...

...fax line test Perform a fax line test to check whether the fax line is properly connected. Step one: Run a Fax Test Press the Setup button ( ) on the product control panel. Use the Arrow keys ( ) to ...