...and don't touch the drum surface with your hands. If all your drums appear to be rotating smoothly the solution may be a replacement engine control board or an imaging unit drive motor.In that
drum and print head and is now tacked to the print head. 3. One of the cables has moved and is hindering the proper movement of the print head. 4. The drive motor gear chain has slipped out of timing.
Question about Xerox Phaser Office Equipment & Supplies
...Motor, PN 807E23090. What usually causes this are cracked Camshafts, 2 of them that usually break together, or soon after the other breaks. Those PN's are 020K14800 (Drum Maintenance Camshaft) and ...
Question about Xerox Phaser Office Equipment & Supplies
...motor. That block may be contaminated with spill over ink from the maintenace tray, or from the printer is not sitting level. If the machine was not shut down properly or if there was a power failure ...
...Drum Motor?s failure to turn C0019 Color PC Drum Motor?s turning at abnormal timing C001A Color Developing Motor?s failure to turn C00l B Color Developing Motor?s turning at abnormal timing C0040 ...
...Drum Motor?s failure to turn C0019 Color PC Drum Motor?s turning at abnormal timing C001A Color Developing Motor?s failure to turn C00l B Color Developing Motor?s turning at abnormal timing C0040 ...
...Drum motor failure. You'll need to check the drum cartridges, remove the cartridges to check. Now enter DC330 [004-003] and press Start. The Drum Motor will now energize and the drive rotates. If it ...
Question about Xerox Office Equipment & Supplies
...drum motor failure. It can be either a seized drum or a motor. Remove drums and enter diagnostics and test the motor first. If that passes put back in one drum at a time and then run the test after ...
Question about Xerox Office Equipment & Supplies
...WorkCentre 24? That error signifies a black drum motor failure. Try remove black drum and swap with another color and see if error follows the drum. If not it's either a bad drum motor or mcu
Question about Xerox Office Equipment & Supplies
...Drum Motor Drum Motor failure. Initial Actions ? Remove all Drum Cartridges. ? Perform REP 1.6. Procedure The machine is a DC3535. Y N Enter dC330 [004-003] and press Start. The Drum Motor energizes ...
10 questions posted
Usually answered in minutes!
436 Questions
284 Questions
262 Questions
152 Questions
147 Questions