...8400 The error is normally caused by the print head wiper being stuck to the print head or the print head pivot block being contaminated with spill over ink. To clean the block you remove the left ...
...8400 Replace the maintenace kit and then in the menus run eliminate light stripes and eliminate smears. There really isnt much else to do. What you do when you run the light stripes and smears modes ...
Question about Xerox Phaser Office Equipment & Supplies
...8400 powers on then errors: 07,010.43:126070 and does nothing more. Any suggestions? Is this a hardware issue? Yeah it is a hardware issue. The code you are getting relates to the print head tilt ...
...8400 need diagrams and instructions on removing and replacing printhead unit Replacing the pring head.1. Remove the side covers.2. Remove the ink loader assembly. There are 2 connectors on the ink ...
Question about Xerox Phaser Office Equipment & Supplies
8400 leaving black smears on my printed pages and after running remove print smears, it doesn't correct the problem. Have you looked at the roll in your maintenance kit? It may be dry in that area and
...8400 stated this error-code any help on this issue?...pleeeeease Thanks in advance! Lambert That problem is comming from the print head not pivoting properly from the print to home position. Most ...
...print head tilt. 1 of two things is the normal cause. There is a print head block on the lower left side of th frame about 2/3rd of the way back and near the bottom of the frame. It gets contaminated ...
...8400 stopped working and gives me error code 07,010.43:1944 I have changed the maintenance kit, but made no difference. What am I doing wrong? Thanks, Jorge... You are doing nothing wrong. That code ...
Question about Xerox Phaser Office Equipment & Supplies
...8400 but not the on that is currently in the used slot. It has been sitting for about a year and used for a year before everyone stopped using it. Could it be stuck. I try to pull it out with a knife ...
Question about Xerox Phaser Office Equipment & Supplies
print head green flag hasn't raised Xerox Phaser 8400 printer has been off for a while, but the green "flag" is still in the low position. Did I miss a step in shutdown? Did you remove the maintenance
15 questions posted
Usually answered in minutes!
436 Questions
284 Questions
262 Questions
152 Questions
147 Questions