Xerox Phaser 8200DP Thermal Printer "nothing printed" Questions

...nothing. I've had it just over 7 weeks now and have printed about 2500 pages. The maintenance kit seems a little soiled but still mostly white. I dumped the collected ink in the try, just in case. ...

...nothing came out and the printer went to "Ready" state. We converted to from CDR to pdf and it printed OK but with the colours distorted. We tried a smaller CDR file and it printed OK. Is there a ...

...printed about 43 pages and most wasn't legible - ink. I read to first take out the toner panel (with handle) and shake it, as that might get a little more use out of the toner, before replacing that ...

...I've updated the firmware to no avail. I have used both the latest PS and PCL global print drivers. Nothing has helped. This was due to the TFTP (PXE) setting on the printer set to on. No more wasted ...

...nothing is printed. The problem will usually disappear after 50 pages or so, unless the printhead is damaged. If the print remains dark, the printhead will need replaced. (Very expensive) (Dark print ...

...both troubleshooting options (eliminate light smears, eliminate print smears) several times and nothing is working! I have cleaned out the trays of ink waste and it is still smudging the print. ...

...8560) I've done every troubleshooting option, cleaned every part that has to do with printing.. and nothing! I still get pinstripes in my images when i print! Help please! Appropriate cleaning ...

...nothing happens. when a test page is printed it works fine. i've tried installing as both a network printer and a local printer, the same happens for both. the laptops are identical, and the first ...

...printed paper. I powered back up and the Xerox come up in the display and just froze. I shut it back of and restarted the printer nothing come back on the display but it looked like it was trying to ...

Printer error 07,010,43;6662 printer switches on but does nothing other than the above mentioned error. That is the print head tilt. 1 of two things is the normal cause. There is a print head block on