Xerox WorkCentre PE16 All-In-One Laser Printer "scanner feeder jamming" Questions

...a paper jam in the document feeder (probably of the scanner part). The fix is to check the feeder and clear the jam. Sometimes it indicates there is a piece of paper stuck or a faulty paper

...feeder takes paper to the first set of rollers to be faxed or copied and then waits for the scanner to slide into position. When it starts to draw the paper in deeper, it goes in crooked and jams ...

...to the latest version. Go to www.kodak.com/go/aiodownloads. If the error continues, try to send the fax using the scanner glass instead of the Automatic Document Feeder. Paper jams - Kodak ...

feeder. If the paper is stuck inside, turn off the Epson Stylus CX. Open the scanner, remove the jammed paper and torn pieces, close the scanner, and turn the Epson Stylus CX back on. Note: Be sure to

...Open the scanner and remove any pepr inside including any torn pieces. Do not pu;; it backward beacuse this can damage the sheet feeder. Close the scanner, then turn the epson stylus CX78oo back

...scanner bed, doc feeder, power pcb. Went on HP assist and initalized NAVRAM, reset machune, ran engine test. Check the sensor arms and make sure they move freely and are free of paper

...feeder, used to feed a document into a scanner or printer. The error is associated when there is a document or paper jam at the document feeder, or paper trail. This would happen mostly on scanners ...

...the scanner glass. any solutions? You may have a really tiny paper jam. You need to open up unit to get access to feeder properly. Use a torch, jams can be so small you can miss them. cheers ...

...a document, now it prompt scanned locked unlock scanner There is usually a scanner lock button on these units, either located under the Auto feeder on the left side, or on the left side of the ...

...Scanner problem When I scan a document either by flatbed or automatic feeder, only the preview of the document works correctly. When I try to scan the document either by flatbed or auto feeder, half ...