Xerox WorkCentre PE16 All-In-One Laser Printer "machine status 14" Questions

...machine. plz help me.tnx NOTE: Some Status codes will not clear even though the problem has been fixed. Status codes that will not clear must be manually reset using the 'Fault Reset 14 Procedure'. ...

status code clears; but no more than five times. Use the [10] and [1] buttons to enter 14 on the Display Screen, as if you were to make 14 copies. Press the [Start] button. The machine should be ready

status code clears; but no more than five times. Use the [10] and [1] buttons to enter 14 on the Display Screen, as if you were to make 14 copies. Press the [Start] button. The machine should be ready

status code clears; but no more than five times. Use the [10] and [1] buttons to enter 14 on the Display Screen, as if you were to make 14 copies. Press the [Start] button. The machine should be ready

status code clears; but no more than five times. Use the [10] and [1] buttons to enter 14 on the Display Screen, as if you were to make 14 copies. Press the [Start] button. The machine should be ready

status code clears; but no more than five times. Use the [10] and [1] buttons to enter 14 on the Display Screen, as if you were to make 14 copies. Press the [Start] button. The machine should be ready

...Machine Sharp AR-5127, the error is F2-02, is there any code to correct this? Error code F2 on sharp ar 5316 This should do it NOTE: Some Status codes will not clear even though the problem has been ...

...machine. The error code should disappear. If the Status code does not clear, repeat step 3 until the status code clears; but no more than five times. Use the [10] and [1] buttons to enter 14 on the ...

...machine. To cancel the trouble status follow these steps: Press CONTINOUSLY the following: STEP1. Press CLEAR key then EXPOSURE key then CLEAR key then EXPOSURE key STEP2. Then you are inside the ...

...machine. To cancel the trouble status follow these steps: Press CONTINOUSLY the following: STEP1. Press CLEAR key then EXPOSURE key then CLEAR key then EXPOSURE key STEP2. Then you are inside the ...