...jam The 7300 we have keeps jamming at the fuser, the paper will get 1 inch out of it and there it stays... we have replaced the fuser and the exit senor and have the same problem... is there some ...
Question about Xerox Phaser Office Equipment & Supplies
Fuser separator levers. The levers will stay in the raised or lowered position on their own. the levers are green. The fuser itself is not easy to remove. Do you have any warranty left on the machine?
...jam E4-10 to E4-14 Inverter sensor not actuated E4-15 Inverter sensor E4-40 to E4-45 Duplex entry sensor E4-6 Inverter sensor E5 Front door interlock E6-1 Tray 1 interlock E6-2 2 tray or duplex ...
Question about Xerox Phaser Office Equipment & Supplies
...jam Removed paperjam before in fuser section. picker fiingers and press rllr are worn. copier worked ok for a week, then it jammed up. removed papper jam, but misfeed lite stays on. how do reset. It ...
...fuser it will stay there until its burned out. Another thing could be that the HVPS is shorting out thus causing the smoke and the burning smell. The best option is to inspect the interior of the ...
stay in place when the fuser is installed. What are the proper steps to correct this error and get the unit up and running ? Sincerely, Carlt322 replace the fuser with a new one. Looks like the sensor
...fuser to clear paper jam.Think it is accessed from the top,clamshell. Normally work on Panasonic, any help would be appreciated, can get more info tomorrow.(Friday the 11th.) Thank you 1st. make sure ...
...jam it repeats it all over again. Is there some way I could see if theres something stuck inside my printer beside the paper? Tip the machine onto it's back and take an A5 sheet of very stiff card. ...
...jam The 7300 we have keeps jamming at the fuser, the paper will get 1 inch out of it and there it stays... we have replaced the fuser and the exit senor and have the same problem... is there some ...
Question about Dell Office Equipment & Supplies
...still the error stays, can anyone help? you have a paper jam or a bad paper sensor. open the back/rear and look for ajam in the fuser. if no jam you have to call a rinter tech to find the bad ...
72 questions posted
Usually answered in minutes!
436 Questions
284 Questions
262 Questions
152 Questions
147 Questions