Xerox Phaser 7750DN Laser Printer "reset factory defaults" Questions

...reset the printer to factory defaults (NVRAM reset). To reset the NVRAM, go to the front panel's Main Menu: Select Troubleshooting, then press the OK button. Select Service Tools, then press the OK ...

...reset but I'm not sure if that will work and be careful because you will set the machine to factory settings and may have to do a colour calibration all over again. Let me know how it goes. Resetting ...

...Factory Defaults (NVRAM Reset) NOTE: Resetting NVRAM returns stored parameters in the image processor board NVRAM to their factory default values. The print count and the Adobe firmware serial number ...

...Factory-Defaults-NVRAM-Reset-.html (and it worked for me): NOTE: Resetting NVRAM returns stored parameters in the image processor board NVRAMto their factory default values. The print count and the ...

factory settings. 1. From the Main Menu, highlight Support and press OK. 2. Highlight Service Tools Menu and press OK. 3. Reset NVRAM is displayed, press OK. 4. Highlight Reset NVRAM and Reset Printer

reset to factory settings. Then select yes and that should take care of it. If not, then in the rear of the printer under the cover, upper left side you will find the memory button battery. Remove the

...reset PS NVRAM as follows: 1. From the diagnostics Main Menu use the UP and Down arrow keys to highlight Print Engine Menu and press OK. 2. In the Print Engine Menu, use the UP and Down arrow keys to ...

...the power. Press and hold the power button for 30 seconds to force a reset back to factory defaults. Still it sounds like a configuration error or bad network driver if this printer is on the

...reset to factory defaults. Hello, I found a solution from xerox website (the link below). If you did not tried it already, you can give it a try. ...