Xerox Phaser 8400 Laser Printer "insert code machine" Questions

insert the ink sticks. Once that is removed you can access the print head/drum area. The blade is pink in color and if tacked to the print head, remove gently. Then run a couple of cleaning cycles and

...code displayed, press UP arrow and OK key. b. Scroll to Troubleshooting: Service Tools: Enter Diagnostic Mode. (Printer restarts). c. Select test 82: Monitor Sensors. Press OK. d. Scroll to 01: Exit ...

...I ordered another Tranfer Roller thinking maybe the first could be damaged (ya never know). Inserted the second Transfer Roller and nothing. Next step I took was to replace the CTD Sensor ...

...code 30. I have already gone into the service menu and cleared the faults. When i overrode the door sensor and ran a belt edge learn, the accumulator belt was not moving at all. I isolated the yellow ...

...nous donne*insert plug in s.v.p notre machine nous donne le code c-0210 puis le code 1038 finalement *insert plug in counter* fleche vers le bouton de demarage notre Di470 n est pas liee au pc ...

code E000245-0010 E 000245-0010, soft counter board problem,Check this board, maybe its missing or it is not inserted properly re insert it other wise it is corrupted, this board cannot be interchange

...code mean and what can i do to avoid such situations, other than proper prcedure following? thanks in advance for your cooperation. kind regards, Hans a support engineer from belgium Remove Cyan ...

...insert a page to scan, select the send button press the address key select the contact you created select ip address press enter now press 2 on the keypad press enter press 2 again enter again and ...

...code? Is it easy to fix? Yes Easy. Get out the Sylinder drum, switch off the machine: open a back cover' on a board press reset then switch on the machine while the drum is out; then insert the ...

code, insert something into the hole until the screen goes blank and begins to restart. You should see the initial screen come up. Keep watching the screen and at the far left side of the screen there