tray's sensor not recognizing the envelope? The manual bypass tray on the Phaser 8400 can be set only when you have paper in the tray. The envelope will read in the set up when you have it in the tray
Question about Xerox Phaser Office Equipment & Supplies
...bypass paper path. As you might know, the workaround is to place the printed page face down on top of the paper stack in the input tray. . I would be amazed that if you tried to run it this way (page ...
Question about Xerox Phaser Office Equipment & Supplies
...the white waste toner section of the Transfer Belt. This spring pushes a flag up that hits the Paper Entrance Sensor (yes, near the bypass tray) The PN for the spring is 116-2050-00. Whit Item,
Question about Xerox Phaser Office Equipment & Supplies
...the white waste toner section of the Transfer Belt. This spring pushes a flag up that hits the Paper Entrance Sensor (yes, near the bypass tray) The PN for the spring is 116-2050-00 Whit Item,
Question about Genuine Konica Minolta Office Equipment & Supplies
...paper jams below the bypass tray There is Registration Sensor located near the bypass tray.Please clean the sensor or else replace the sensor or DC board.Orelse please check the pick up roller ...
...do anything but jam. Even 20 # paper in the bypass tray will jam. I am trying to print 12 copies, 16 pages each. any tips? check the paper actuate of the sensor if it o.k check the sensor if its ...
...paper into the bypass try you're activating a flag which tells a sensor there's paper there, if this flag is stuck forcing the sensor to constantly think you have paper there it would always ...
Question about Canon Office Equipment & Supplies
...paper from the side bypass tray. if still no go, you may have something blocking the paper from feeding. if it feed from the side bypass but not the cassette, paper feed tire may not be feeding paper ...
...first clean as you can the paper feed roller in tray and also check the manual feeding. If you can feed on bypass tray, then the paper sensors are OK. Look for problem in tray or rubber roller ...
Question about Ricoh Office Equipment & Supplies
...paper bypass sensor does not sense the paper. empty tray indication light ON althogh paper in the tray. Dirty or faulty sensor. Check if you can give it a good blow with a blower (if you have one) ...
345 questions posted
Usually answered in minutes!
436 Questions
262 Questions
152 Questions
147 Questions
158 Questions