Zebra LP 2844 Thermal Printer "cut" Questions

HOW DOES THE KNIFE GETS ALIGN SO IT WILL CUT? You have to tell it to cut. Your software has to know there is a knife attached to the printer, so it will know to cut. You have to program it to cut, ...

...is using epson thermal printer TM-T88II printer and is using a software by which receipt is auto cutted after the printing is done. I have given him pay roll entry software, but the paper roll is ...

my printers is not automatically cutting the receipts Cutting is typically either a command being sent in the print stream from the computer or is a configuration setting in the printer to cut after ...

have a Epson TM-U300 and use a generic printer setup for printing, the problem is I canot get it to cut the paper using the generic printer setup. Anyone know how to get it to cut, it cuts on selftest

is not cutting and cutter is on, also, it is printing double lines Fault: Double line & paper is not cutting.>Check encoder strip, any damage or dirty?>Clean encoder strip, replace ...

...This printer is very finicky about paper loading. I see this error most commonly when using auto-cut roll paper. If the paper edge is not cut perfectly straight, and it is not inserted into the ...

tsp100 not cutting receipt my receipt machine is not cutting the receipt the Auto-cutter on that model is only a 'partial' cut, (Guillotine-style.) Since it is an Auto-cutter, if it is not cutting AT ...

I am using OM 130P cutting plotter. I just want to ask what could be the possible cause of head jamming. Actually when cutting is in progress the carriage is not moving but if I force to move the ...

unfinished printing cut-off The printing was not finished, it was cut-off by the auto-cut. Are you using the APD304e driver for your printer? It has option where to cut paper, if not you can download ...

Paper not cutting The printer has suddenly stopped cutting the paper. Does anyone have an idea what settings i need to change to make this work? Thanks in advance! Dipswitch 1, switch 1 should be on, ...