Zebra Z4M Printer "instead labels prints" Questions

My zebra z4mplus just start printing at the center of the label instead of at the left side of the label. Instead of a normal full printing on a label, now the left half of the label is blank, and the

...It will not print the rest of the label that needs to be printed out. Please check your driver settings, you will probably find that you have the printer set to use the 2x2 labels instead of the ...

prints a label then the pause button comes on. If you release the pause it will print the second copy of a 10 copy label. This goes on randomly, any thoughts? Sounds like you may have it set for "peel

labels 1 by 1 instead of de total ammount. Also in the screen in the printer he indicates printing 1 by 1. He used to show for example 2 of 200, 3 of 200, and further. I'll hope some one could help me

instead of one We must establish whether the problem is a moving label or just that the labels are not aligned properly. Is hte printing split across the two labels consistant regardless of hte number

...labels that did not need a ribbion. I have recently changed to a plastic label that requires a ribbon. But even yhough the printer goes through the motions, it does not print anything. I have a Zebra ...

labels, there are lines that run through them (can not print over these lines). I have tried cleaning the printer head numerous times but the lines remain. My only solution thus far has been to adjust

...instead of changing the Rols i was thinking if i can insert two different coloured tag rolls. & how do i then command to print one coloured tag at one time? you can reply me @ [email protected] If ...

...Labels are reloaded. Is there a configuration setup for the files to be in the memory until the label is reloaded and then print instead of lossing it completely? is possible calibration issues. ...

...labels instead of one. How can I fix this? make sure the printer is calibrated. It should feed 1 label only. If it does not default it to force a calibration. hold pause and feed while off then turn ...