...have a Zebra Z4MPlus printer, and everytime i try to print a label, the ribbon gets wrinkled and the labels have blank spaces... how can I fix this? I changed the print head, and the issue was
...ribbon. So how do i fix it? go to the setings, and check Direct Termal or Termal transfer, Have to be Termal transfere, then run manual calibration, if still going, try to go tu Ribon sensor and ...
Question about Zebra Z Office Equipment & Supplies
...ribbon. Is there any way I can fix this? For the issue with your ribbons take the spool and wrap a section of it about half way around the pulling portion and use some duct tape to place it on it ...
Question about Zebra Z Office Equipment & Supplies
...the gap between the sensor and the chrome surface is .060in. or 1.5mm. solution from Noel O'Kell fixed my issue. Also the two sensors below (ribbon and printhead)it should be clean, dont touch
...no panel impreesao.aguard. e que isto a nao imprime na porta paralela solution from Noel O'Kell fixed my issue. the two sensors below (ribbon and printhead)it should be clean, dont touch them, ...
...Ribbon out error, as previous solutions recalibrate the printer will fix it. What happens is the printer has lost or corrupted the settings it has for the calibration. By re-calibrating will restor ...
Question about Zebra Z Office Equipment & Supplies
...of printing. I have cleaned the lazer. Im not sure what else to do. Use the Menu system to recalibrate the printer, this should fix your ribbon out issue, if it doesn't you might have a failed
Question about Zebra Z Office Equipment & Supplies
Zebra Z4Mplus won't calibrate 2" Circle Labels Hi! My z4mplus calibrates automatically on 1.25" circles, 2.75x1.25" and 2.75x2" rectangles but won't calibrate (auto or manually) on my 2" circles. It ...
labels sticking to ribbon When printing most of the labels stick to the ribbon. Is there any way of fixing this If I had a guess...this label material sounds old or stored improperly...possibly to ...
Question about Zebra Z Office Equipment & Supplies
...ribbon remove it, it will ask to load the backing. Remove a label from the backing and let it do its thing, eventually it will ask you to load all. Re-install all the media and it will calibrate, ...
270 questions posted
Usually answered in minutes!
235 Questions
32 Questions
32 Questions
11 Questions
6 Questions