Zebra Eltron LP 2824 Thermal Printer "printing light label" Questions

...light comes on. How do I get this to come out right on the line to tear the label? This is an easy printer to fix since there is only one control button. Turn the printer off. Hold the green feed key ...

...label and the gree light goes red. remove power and will turn on green light and will print the nex label in part Fixed problem. Labels were too thin so LED was still being detected to stop progress ...

...printing too light This could simply be old direct thermal labels. Direct thermal labels have a shelf life of about 1 year from the date of manufacture. After that time has lapsed the thermal coating ...

Printing a 2.25 in label on Zebra LP2824. Prints fine but does not align itself for next label. Recalibrate the printer and you should be good to go. Do this by turning the printer off, press and hold

...printing. The way this is supposed to work is the ticket should print, then stick out of the printer about half way. Press advance once and the ticket is in position to be torn out and the printer is ...

my zebra tlp 2742 printer always stay yellow light. and does not print. Try calibration it may help: TLP 2742 is printing blank labels

Printed 1 labal than stop, skip the next 2 then I get the red light This is a calibration issue than can be resolved with this article: TLP 2742 is printing blank labels

light. Click on button and it advances another label (sometimes skipping a label or two). This can even occur in the dump mode! ie it starts page feeding and then half prints the dunp message and then

...printing. Do you mean that you need to retain the pressure to have good print quality on the right side or you need the pressure to keep the amber status light from showing ? There is a small optic ...

...light when printing labels. Tried calibrating but it stalls with solid red light before printing out data Try another roll of labels? If that doesn't help, it may have a problem with the sensor that ...