Zebra Eltron LP 2824 Thermal Printer "light printing" Questions

...printing too light This could simply be old direct thermal labels. Direct thermal labels have a shelf life of about 1 year from the date of manufacture. After that time has lapsed the thermal coating ...

Printing a 2.25 in label on Zebra LP2824. Prints fine but does not align itself for next label. Recalibrate the printer and you should be good to go. Do this by turning the printer off, press and hold

...light when printing labels. Tried calibrating but it stalls with solid red light before printing out data Try another roll of labels? If that doesn't help, it may have a problem with the sensor that ...

...only part of label the printer stops feeding the paper before the end of the label and the gree light goes red. remove power and will turn on green light and will print the nex label in part

... I adjusted the settings to cut every time and now it goes about a 1/4 inch out too far and the red light comes on. How do I get this to come out right on the line to tear the label? This is an easy ...

my zebra tlp 2742 printer always stay yellow light. and does not print. Try calibration it may help: TLP 2742 is printing blank labels

Printed 1 labal than stop, skip the next 2 then I get the red light This is a calibration issue than can be resolved with this article: TLP 2742 is printing blank labels

...printing. Do you mean that you need to retain the pressure to have good print quality on the right side or you need the pressure to keep the amber status light from showing ? There is a small optic ...

pvc cards are low quality and have distortion on the faces, you can check them by seeing reflection light al the sides, if misprinted area have a constant pattern the check rollers, if lines appear in

red light comes on when go to print red light when to print You need to cycle the power and I would perform a calibration: Calibrate Zebra Desktop Printer