Zebra Eltron LP 2824 Thermal Printer "light" Questions

PRINTS ONE THEN LIGHT TURNS RED The internal casing's probably warped. Push down on the Zebra logo until the light goes green.

red light comes on when go to print red light when to print You need to cycle the power and I would perform a calibration: Calibrate Zebra Desktop Printer

orange light comes on. If I push down on the top lid it will turn to green. It will either print or hum real loud and the light goes to red. just take out the power and wait for 5 min. then start ...

Our LP 2824 Zebra printer stalls with red light when printing labels. Tried calibrating but it stalls with solid red light before printing out data Try another roll of labels? If that doesn't help, it

...only part of label the printer stops feeding the paper before the end of the label and the gree light goes red. remove power and will turn on green light and will print the nex label in part

...is still like new and power is going to it ok, as it sync's itself (with noise) and the LCD panel lights up (blue). However, the same LCD panel remains completely blank when switched on, not even ...

zebra eltron LP 2824 printing too light This could simply be old direct thermal labels. Direct thermal labels have a shelf life of about 1 year from the date of manufacture. After that time has lapsed

LP 2824 The printer works fine except I have to hold down the lid. The light around the feed button is red, but if I apply pressure to the lid it turns green. Is there something I can do to fix this? ...

...and that it finally comes out of dump mode. Will print perhaps 4 - 6 labels and then stop with red light. Click on button and it advances another label (sometimes skipping a label or two). This can ...

switch on the side. press and hold the button on the front of the machine while you turn it on. The light will turn red then release the button the light around the button will then turn a solid greed