2011 Harley Davidson FLTRUSE CVO Road Glide Ultra "running problems 1 cylinder" Questions

...on 2 cylinders at stop lights in town. Before the tuner it was on 1 cylinder by the first light in the summer time. If your dealer installs it they will not void any warranty . You'll be glad you

My #1 and #2 cylinders are not firing. I have My #1 and #2 cylinders are not firing. I have replaced plugs and coils and they still will not fire. I was doing around 90 the other day after a long ride

...1 cylinder cuts in at higher revsit cuts in and runs good i have had carbs cleaned valves ajusted carbs balanced compresion is good and all new plugs and caps inlet rubbers are in good nic check ht ...

...running rich took carbs off inspected # 3 carb did't find any problems reinstalled carbs and still have problem I think poss. valve stem seal compression on # 3 240 psi What is the compression on the ...

1 cylinder at times Sometimes it loses a cylinder while riding,also the tach goes dead, then it takes off again. I changed plugs 3 times and it still does the same. The last time I rode it it wouldn't

...backfiring and is mostly running on 1 cylinder...what could be wrong? Looking for place to start. coil problem for no2 cylinder could be a crank ot cam position sensor failing or wiring ...

...1 for each cylinder and also 3 sets of contact breaker points you can narrow the problem down to each cylinder indervidualy, ie if no1 cylinder does not spark check the points/ contact breakers are ...

running on #3 cyl' on my 1982 gs550 fires up on button, compressions good, all float levels are even & plug gets wet , there is good spark at plug i am at a loss i'm thinking possible valve timing

...1 cylinder gets hot engine will start and run,but only 1 side is firing and getting hot,the left side sounds to be free and moving.The bike will 'ride' but as a 600cc,not really ideal.Any ideas? Do ...

...running 50 mph and come to a stop.. rail road or 4 way stop sign..i get a miss fire or down to 1 cylinder or 2..go to give it throttol and nothing bogs no gain in rpms.. if I let it idle it hit and ...