Question about Harley Davidson Street Triple 675 Motorcycles
...Remove fork stem cap and remove fork stem nut. 11. Lift handlebars from steering head with upper triple clamp attached. Be careful not to pinch or kink control cables. 12. Remove adjusting nut, seal, ...
Question about Harley Davidson Street Triple 675 Motorcycles
...Remove upper triple clamp and handlebars. 2.Loosen fork stem bolt and let fork stem drop down approx. 5 inches. Note: On the left side of the steering stem there is a "half moon" indentation that has ...
Question about Harley Davidson Street Triple 675 Motorcycles
...Remove upper triple clamp and handlebars. 2. Loosen fork stem bolt, Let fork stem drop down approx. 5 in. On the left side of the steering stem there is a "half-moon" indentation that has been ...
...Remove upper triple clamp and handlebars. 2. Loosen fork stem bolt. Let fork stem drop approx. 5 inches. (127mm) On the left side of the steering stem there is a "half-moon" indentation that has been ...
remove the upper triple tree and handlebars. Raise the front end off the ground and loosen the fork stem bolt and allow the front fork assembly to drop down approximately 5 inches. On the left side of
...handlebar to left until front end starts to continue turn by itself. When it hits the fork stop (rubber bumper), it should bounce to the right, fall back to the left, then bounce right one more time ...
Question about Harley Davidson Street Triple 675 Motorcycles
...remove, just loosen them) the bolts that clamp the fork tubes into the upper and lower triple clamp braces. Loosen the front axle attachments to the fork legs. Now stand in front of the bike and hold ...
Question about Harley Davidson Street Triple 675 Motorcycles
...remove the whole indicator then try to disconnect the indicator wires behind headlamps as they will need to twist and then hold indicator firmly by stem and unscrew whole thing anticlockwise. It will ...
Question about Harley Davidson Street Triple 675 Motorcycles
handlebar. FOR FLHR/C: remove the headlamp and the handlebar clamp shroud, remove the twist grip sensor jumper harness connector [204], 6-place Molex (black), from its T-stud on the fork stem nut lock
Question about Harley Davidson Street Triple 675 Motorcycles
remove the upper triple tree and handlebars. Loosen the fork stem bolt and let the fork stem drop down approx. 5 inches. Then your lock will come out. Note: On the left side of the steering stem there
12 questions posted
Usually answered in minutes!
681 Questions
595 Questions
586 Questions
644 Questions
456 Questions