2011 Harley Davidson FLHX Street Glide "twist grip sensor" Questions

Electronic throttle not working fro street glide Likely the twist grip sensor but WHAT DTC 's are set?

...Twist grip sensor) P2176 EFI Closed Position Not Learned U Codes U1016 Loss of ECM Serial Data U1064 Loss of TSM/FSFM Serial Data to ECM U1097 Loss of Speedometer Serial Data to ECM U1255 Serial Data ...

TWIST GRIP SENSOR 4.10 REMOVAL Remove the left side saddlebag, remove the left side cover, remove the main fuse, (Do not remove the switch housing assembly without first placing the 5/32 inch (4.0 mm)

...twist grip equipped motorcycles to remove the throttle or right side grip remove the upper and lower switch housing screws, loosen the upper screw securing the handlebar clamp to the master cylinder ...

...TWIST THE GRIP AND NOTHING, IT HAS THROTTLE BY WIRE. Question edited for spelling > throttle. Please don't type in all CAPS, it is considered SHOUTING and is difficult to read. 'year make model' ...

...twist grip off (you have to remove the master cylinder and switch housing) and check it's bore, and the handlebar end it rides on, for any built up crud (rust, dried up lube, etc.). Hi Miafed, ...

...Twist the throttle grip at the handlebars slowly as you observe the action of the linkage. 6 Tighten the cable adjuster at the top of the carburetor with a metric wrench in small increments so the ...

...Twist grip sensor) P2176 EFI Closed Position Not Learned U Codes U1016 Loss of ECM ****** Data U1064 Loss of TSM/FSFM ****** Data to ECM U1097 Loss of Speedometer ****** Data to ECM U1255 ****** Data ...

sensor. I tried this. The first reading I took was when the grip was at idle, according to the article the reading should be between 0.584 - 0.650. My reading was .650. Next was to take a reading with