2011 Harley Davidson FLHR Road King "jiffy stand spring" Questions

...Jiffy Stand WWAARRNNININGG Block and support the motorcycle under frame to be sure that it is securely upright and level and so that the jiffy stand can be moved throughout its full range of travel ...

...Jiffy Stand WWAARRNNININGG Block and support the motorcycle under frame to be sure that it is securely upright and level and so that the jiffy stand can be moved throughout its full range of travel ...

...jiffy stand and anchor plate and pull the pin from between the frame tubes and then the jiffy stand and the pivot block will drop out together as one piece. To reinstall the jiffy stand put the pivot ...

jiffy stand spring on my 2011 heritage softail? Where the kick stand bolts to the frame, there is spring plate that his held on by two bolts and nuts. Loosen these two bolts and allow the spring plate

...a kick stand spring on my 2006 harley davidson ultra classic well the easy way is to jack up bike remove the nut jiffy stand slide it out hook spring slide it back in and tight nut hope this ...

...jiffy stand sensor on my dyna low rider from 2008 See below. Are you aware of this recall? Do you know if the bike has been checked? HARLEY-DAVIDSON MOTOR COMPANY Make / Models : Model/Build Years: ...

...jiffy stand and need to know if i have to remove the pivot pin and take the stand out for change or can i do it while installed on the frame by removing the back bolt that sits in the jiffy leg? The ...

...jiffy stand leg FIRST support the motorcycle with a suitable lifting device so it securely upright and level and the jiffy stand is able to move through its full range of travel, move the jiffy stand ...

...Jiffy Stand pivots on. cant find out where it gos on the frame Hi, Timothy and Teresa there is a tab with a hole for the spring as an attaching point on the back side of the jiffy stand and another ...