Question about Derbi Bear Choppers GTX Fairing 100 Motorcycles
it has a rattle were the starter motor is your starter clutch maybe going out
Question about Derbi Bear Choppers GTX Fairing 100 Motorcycles
...clutch's always rattle at an idle when in neutral. If you just pull in the clutch lever the rattle will go away. Let the lever out and it will rattle again. As for the slippage, if your clutch cable ...
Question about Derbi Bear Choppers GTX Fairing 100 Motorcycles
...clutch and the rattle stops, it's just the clutch plates rattling when you pull in the clutch (clutch disengaged), as there is no load on them they are free to move, and there is a gap between the ...
Question about Derbi Bear Choppers GTX Fairing 100 Motorcycles
...clutch rattle I put a new one in. The rattle is still there. Its not a rod or a main the rattle goes away when you give it gas what could it be I am lost It really depends on the sound, but all Honda ...
Question about Derbi Bear Choppers GTX Fairing 100 Motorcycles
...rattle against each other or the frame. Exhaust System: Inspect the exhaust system for loose or damaged components. Exhaust pipes or baffles that are loose or damaged can produce rattling noises. ...
Question about Derbi Bear Choppers GTX Fairing 100 Motorcycles
...rattle in my clutch (hopefully not transmission). During cold start-up there is a rattle in the clutch that can be felt in the lever. The rattle changes sound when the lever is pulled in. It is only ...
Question about Derbi Bear Choppers GTX Fairing 100 Motorcycles
Clutch rattle and notchy gearchange The shock absorber springs in the clutch seem to wear the basket badly so rattle around. Several shock absorber springs (there seem to be two lengths/types) seem ...
Question about Derbi Bear Choppers GTX Fairing 100 Motorcycles
...rattle clutch rings www.bikebandit.com It's one of the few that has a diagram. Not sure what you mean by anti-rattle? The springs are for the pressure plate, and allow the clutch to grab, so you can ...
...rattle behind the primary cover. When I put the transmission in gear, the noise stops Does the noise happen only when you pull in on the clutch (disengage the clutch), and go away when you let the ...
Question about Derbi Bear Choppers GTX Fairing 100 Motorcycles
Noise when clutch is fully disengaged If it's a rattle sound, most likely the clutch plates rattling until they clamp up with the pressure plate when you release the clutch lever.
6 questions posted
Usually answered in minutes!
4 Questions
2 Questions
5 Questions
1 Questions