rear mudguard I was wondering if you know of where i can get a rear mudguard or if not of any other that fits the gn. Also do you know if it is possible to change to 12 volts. Does other GN of GS ...
fork brace On the standard overweight ugly front mudguard on my Jackal there is a heavy brace which is attached onto the forks by 4 bolts. I presumed this was designed to reduce fork flex. Its heavy ...
...supports you have are matched to the bike you have, you should find a couple of nuts on the back mudguard (Probably holding some chrome work in place if it is a cruiser). That are the same spacing ...
...cable or a lever NICE BIKE, AS FAR AS I CAN REMEMBER IT IS HELD ON WITH 2 BOLTS, UNDER THE REAR MUDGUARD, ONE ON EACH SIDE, REMOVE THESE BOLTS LIFT UP THE BACK OF THE SEAT AND PULL THE SEAT ...
How can I remove Activas front mudguard? Hi, Arsalaan for more information about your question and valuable "FREE" downloads that you will need please visit the websites below. Good luck and have a ...
Question about Vespa ET2 50 Motorcycles
Im looking for a rear mudguard for a Tuscany Tibet any offers? the factory takes 30 to 45 days to send it to Mexico if you have it I´ll buy it look ...
...the front mud guard Can you tell me how to remaove the front mud guard FOUR BOLTS HOLD ON THE MUDGUARD, THESE NORMALY SIEZE, THE LOWER ALEN KEY BOLTS SIMPLY UNDO IN A NORMAL DIRECTION, THE
how do you take off seat Under the rear mudguard there are invariably 2 bolts (usually requiring a 10mm wrench) that are symmetrically mounted and pass through the mudguard then into the seat. Remove ...
7 questions posted
Usually answered in minutes!