2009 KTM 50 SX "carb fuel mixture screw setting" Questions

...carb is soaking in the mixture...leave for a day, the crean all parts and blow out with high pressure compressed air. and re-assemble, and refit.....please note, never use ethanol fuel in your ...

fuel mixture from idle rpm up to about 1/8th throttle. To access the pilot screws, you may need to remove the air box and carb side cover. The factory default setting for the pilot screws is typically

...carb/s flooding with fuel and thus it dies, try to reset the float pin and get the correct level of the fuel in the float chamber. Standard procedure for air-mixture screw setting is u take the screw ...

...carb. One screw is likely to be the throttle stop screw used mostly to adjust the idle speed but sometimes only to provide a basic setting for the throttle. One screw is likely to be the idle mixture ...

...info on your carb you will need to find out the setting for fuel air mixture screw it should turn in to reduce fuel to air mixture but find out the setting for your make of carb as they all ...

fuel screw in carb. set it to 2 turns out. But when i screw in in the revs go up and when i screw it out it starts to stumble. From my experience, this seems to be reverse to what i am use to ??? Yes,

...fuel going to the combustion chamber) You have to set the air-mixture screw on the carb/s. Clean the carb/s, replace 'inline' filter , if you don't have one ..install one, reset float level. It's ...

...carb mixture screw may add air or fuel, depending on the model. If the bike will idle it can be adjusted without knowing the factory setting. What you want is the highest idle that can be achieved ...

...carb. fuel mixture adjustment screw should be very close to the setting needed to operate the engine normally. You should not have to move the screw more than 1/8 th turn in either direction from the ...

...Carb air/fuel mix screws - KatRiders.com https://katriders.com > forum > mechanics-101 > 48187... Apr. 21, 2009 - Starting with carb #1, turn the mixture screw 1/4 turn at a time in or out till the ...