Question about Harley Davidson Honda Hunk 150 Motorcycles
replaceing battery now my lights stay on with the ignition off when i was replacing the battery on my 2009 V rod muscle i made sure i hooked up the positive side first. then as i started to hook up ...
Question about Harley Davidson Honda Hunk 150 Motorcycles
my 2009 vrsc H-D will not start, all the gauges come to life my security system is on and blinks about 15 times, I charged my battery, put a new battery in my fob, nothing not even a click, could it b
Question about Harley Davidson Honda Hunk 150 Motorcycles
engine making a loud noise in back cylinder, has good compression what could it be. The following are your choices of what the problem could be > > pre-ignition, aka 'detonation' and 'engine knock'. ...
Question about Harley Davidson Honda Hunk 150 Motorcycles
how to install power rod on a 2001 kx85,we did a piston and ring replacement and the power rod came right off, but how to reinstall is the problem when your putting the barrel back onto the piston ...
...rod problems I changed the clutch plates and accidentally squeezed the clutch which made the clutch push rod come out so that I can't get the pressure plate back on. How do I depress the push rod? ...
...problems instore for you. Are you sure it is a con rod and not piston in cylinder seized? If it is a con rod bearing see what a shop would charge, then see what is available on ebay for parts. I have ...
Gear selection I can only select 1st & 2nd gear, any ideas what the problem might be? Has the bike been dropped on the shifter side??? Has someone kick hard on the shifter leaver???There is a shifting
Question about Harley Davidson Honda Hunk 150 Motorcycles
is the con rod suppose to be moving around? i have a kx60 on a full rebuild and i was wondering if the con rod should have any movement atall, as i took the piston barrel off and the was slight up, ...
Question about Harley Davidson Honda Hunk 150 Motorcycles
2006 yz 125 breaking push rod in clutch The push rod in my clutch keeps breaking on the left side where the rod meets the lever, it is a clean break in the same place as the previous rod, I have no ...
Question about Harley Davidson Honda Hunk 150 Motorcycles
i recently bend my clutch rod at that time fluid was coming out from the clutch rod hole..it may be low because now at a good speed in 6th gear it feels like a its sipping for fluid and starts to tug.
15 questions posted
Usually answered in minutes!
15 Questions
2 Questions