Question about Harley Davidson Bullet 125 Motorcycles
noise stops, clutch works fine all harley clutches make noise is it a wet type or dry is it evo or shovel head and how many miles on it ??or last replaced or was it REBUILT??? hogs are touchy unless u
Question about Harley Davidson Bullet 125 Motorcycles
...noise Well, the compensator should not be making noises so you might be well advised to look further into that. Give some history of the clutch problem. What was done with the bike just before the ...
...noise happen only when you pull in on the clutch (disengage the clutch), and go away when you let the clutch out (engage the clutch)? If so, that's the clutch plates rattling until the spring load is ...
Question about Harley Davidson Bullet 125 Motorcycles
...and cable what else could it be.. also the compensator is tight but makes some rattling noise If your clutch won't engage then it's because your clutch discs are burned out and need to be
Question about Harley Davidson Bullet 125 Motorcycles
clutch the noise goes away I'm not sure what you mean by "engage the clutch". If you mean when you pull the clutch lever, the noise goes away, I'd check the tension on my final drive belt. If the belt
Question about KTM Motorcycles
engine clutch make nise when engaged noise goes away when clutch is dissengagued Waren clutch and or low oil check oil with engine at running temp also check for metal shavings in your clutch oil
Question about Harley Davidson Bullet 125 Motorcycles
it produces some noise iside the engine please check the clutch plats alignment,and ensure the clutch wire is perfact working.If it is perfact change your bike's clutching system due to this error
...noise when clutch engaged when i engage clutch there is a slight knocking noise coming from side casing like gears are touching but not completely engaging when i engage 1st gear it clears Drain the ...
Question about Harley Davidson Bullet 125 Motorcycles
noise can you help me? Possible that the starter pinion gear has come off or the pinion itself is not throwing out to engage on the ring gear. You may have to take the starter out to check and confirm
55 questions posted
Usually answered in minutes!