2008 kawasaki Vulcan 900 Custom "switch position" Questions

my vulcan tail light stays on after with the ignition switched off. What can I do to stop this reoccuring The ignition switch has three positions. Off at 6 o'clock, on at about 7 o'clock and park at 9

no power to the fuse box or ignition Check the power at the ignition switch in all positions.

...engagement. Another scenario is unacceptable voltage drop to the starter solenoid from the ignition switch to the starter relay to the starter button, and finally to the solenoid. Remove the green ...

...switch) The gear position indicator displays "- -" to indicate the system enters the intial setting mode. If more than 5 seconds elapse or the procedures are incorrect, The "N" stops blinking and ...

...switch into wire harness, place switch into position. The word "TOP" is marked on the top of the switch body to allow for proper positioning of switch. 6. Install lock ring to secure switch in

...switch is in the stop position, the starter doesn't have any "fire" to it and it won't turn the engine thereby telling you that you have something wrong. The old Shovelheads had a "Run/ Stop" switch ...

...switch in the off position (the negative first and positive second) all the lights came on except for the headlight but the switch was just in the off position. I then turned the ignition switch with ...

Hello, I'm having no luck at all restarting my Honda Deauville after switching the petcock to the "reserve" position. Even after toping up with fuel and switching back to the "on" position the bik

...switch into wire harness, place switch into position. The word "TOP" is marked on the top of the switch body to allow for proper positioning of switch. 6. Install lock ring to secure switch in