...It looks like power transformer got partially shot (reads 11 V AC instead of 56) I just don't know if it's all the problem or there is something else. And where I can find replacement
...shot. If the subwoofer has a seperate power cord from the rest of the unit, your amp is toast. If the subwoofer is powered by the same unit that is powering the other speakers it could be a loose ...
Question about Mackie Audio Players & Recorders
Mackie fr series m-1400 pro amp not working, no power, fuse not blown output finals are shot,and get the caps checked also.
Question about Altec Lansing Audio Players & Recorders
...power supply. That would be really odd indeed Gerhard Weber. Faulty input wire. Check the connections between the receiver and subwoofer. May need to clean them if dusty. Altec Lansing says in the ...
Question about Samsung Audio Players & Recorders
...power is on bar however I can't get any sound out of bar. But just audio cables worked what to do? OK, If its the Samsung Sound Bar, this item should have 2 HDMI input, 1 3.5mm audio jack input and a ...
...buzz, you need to replace that driver. If the buzz is electronic in nature, assuming these are the powered versions, a qualified service tech will have to diagnose and
Power Amplifier shot a big jolt of DC Voltage to the Speakers and opened the Woofers. If this was the case the speakers would read open and not the 8 ohms they should. If this happened than your horns
power or signal The light on the subwoofer comes on but when i connect it i get no sound to the sub. I own two of these and only have trouble with one. I know its hooked up correctly because i put the
...shot. Will need to be replaced. Not an uncommon complaint on this model. You may have lost the ground connection on the input. Or, some component may have failed in the power supply for the
Question about M&K Sound Mp Series Audio Players & Recorders
...shot. any suggestions?? thanks, Andy There are a couple of possibilities. The first one is just moving the ac cord that goes to the power supply away from the board by tucking it into the insulation. ...
4 questions posted
Usually answered in minutes!
1 Questions
1 Questions
1 Questions