Uniden 1260 1-Line Corded Phone "check 1" Questions

...lines, eg dial 9 for any line or 81 for line 1 82 for line 2 etc . if you get crackle still on 1 of the lines get your maintainer to check the lione at the cable head where lines enter ...

...check that line 1 is line 1 one all of the phones, then line 2 is line 2 etc. If one phone has line line 1 showing up on line 2 then you may have wires crossed somewhere. Or if you pick up a line on ...

...only one line. how do i get the "check line cord line 2" message off the display? Turn phone upside down and look for a little ***** switch that says 1 -- 2 -- 1+2 and slide it to the "1"

...has jumped out of the pad. 3. the pad contacts are off the track. Remove the board and reset after checking the above sections. If there is crack resolder and bridge the

...3, but no longer works on line 1. This is a new problem after 3 years of it working properly. I checked the programming and all is ok. Is it time for a new card? Thanks Bill Lucia Hard to say.

...check supply of ringer & change ringer Ic Off hook ring and Headset ring could be both enabled causing the phone to flash only and not ring To resolve this issue Press Menu Press settings 1. User ...

...check with your phone company. To program TONE/PULSE for all 3 lines: 1. Press STORE/IN 2. Press 0 for PULSE or Press 1 for TONE 3. Press STORE/IN 4. Press TONE To program TONE/PULSE for each line ...

...2200 won't work simply beep 3 times freestyle 2200 handset won't work simply beeps 3 times Hi - I checked all the handsets and found I had two registered as no 2, 1 as 3 and 1 as 4 - NO No 1! I ...

...Check-Out. We have 7636's set up to do it and the command is *76*1 ext HHMM 0/1 0/1 . Now, the explanation HHMM is the time in 12 hour format if you are using a 12 hour clock, the first 0/1 is ...

...fine for 1 1/2yrs. It now continues to go thru the cycle with or without brake pushed. Removed it and placed it back to original and brake light still on Check front brake switch. Probably