Peavey Electronics Peavey PVI 4B Audio Mixer "sound amp" Questions

...at this link- Peavey com 1 3k amp powers up but no sound Peavey Forum Tube Amp Troubleshooting 101 Amp turns on no sound tubes wont light up Peavey 6505 Amp turns on no sound power tubes don ...

amp. You kinda sound as if your amp sounds wimpy. ALSO, a good metal distortion is a combo of effects as well as tone(layering). The sound you may be expecting may be the sounds of 4 effects combos at

...the inputs is short circuit - hence the whining sound , to check disconnect all inputs and Switch-on the Amp if you still hear that whining sound then describe your Amp with more details i can help ...

...Amp In"...sound distorted = power amp failure. In your case the latter is the case as your "line out" is clean. Also test each speaker for clear sound as speaker cone damage from being overpowered is ...

...sound when the amp is on with nothing plugged in. The only way to stop the sound is to unplug the loudspeaker on the amp (I can't play without the loudspeaker plugged in!). Does anyone know what ...

...sound. I opened the amp to find the 1/2 amp slow blow was shot. Replaced and amp worked for 1. day. Now the amp has a pulsating deep pop and is not effected by any controls or if a guitar is even ...

viper 120 amp. I plug in headphones and I get sound to those but when I take them out there's still no sound coming from the amp speakers. Suspect switch contacts that are a part of the headphone jack

...sound, amp runs on batteries and ac adaptor. I bought used and it didn't come with adaptor. I was told than any 9 v ac adaptor should work, so I used one, worked for a while, though sounds was ...

...sound through the second amp than the front end of the 212R is OK and you may want to check out the speakers and speaker wires. If there is no sound the problem may be with the input jacks. Input ...

...sound coming through amp from the guitar. Do you think this is just a problem with the cable? Sounds like the power amp section of the circuitry has a fault.Not easy to fix unless you are familiar ...