NetGear WGT624 Wireless Router "modem internet led blinking computer" Questions

modem. Check the "Internet/Online" LED and make sure it is blinking green or a solid green. If this LED is not blinking, then the modem is not getting a phone signal, or the service is out. Remove the

internet modem cable), to the standard ports? It should have a WAN port, for the cable from the modem, and a LAN for the cables to the computer? On the other hand, if it is working, I would leave well

the router lights stabilize, turn on computer and try it again 6) If the internet light isn't working on the cable modem (or DSL, for that matter), contact your provider and have them check their side

...internet is steady (or blinking if that's how your modem indicates connectivity). Once you can confirm that both are working fine, move on to the next set of actions. If you face a problem in these 2 ...

...Internet through the modem. 8. Prerequisites are: an active 2-wire/telephone ADSL account, LAN card in your PC, appropriate Operating System, and all the accessories that came with the box of the ...

connect your modem to the internet port on the router, do a power cycle on the modem and router. then check the status tab on the linksys setup page if you have numbers on the dns it should be online

...modem itself is working fine with internet and stuff if its connected to the computer directly. but when it tries to connect to router the router's modem led is orange and keep on blinking any help? ...

...internet from my desktop computer which is connected to the #1 port but my wireless access is out. I can't enter the web based configuration utility. I have checked and replaced the ethernet cables, ...

...Internet. The Sys LED blinks red on boot up but doesn't stay lit. I'm using an eMac G4, Mac OS 10.4 and a Westell 6100 DSL modem. I've tried rebooting the computer, router and modem in different ...

...modem to the Internet port of the router. The Internet ?i? LED on the front of the router should light up. b. Connect the computer to one of the four LAN ports (i.e port 1, 2, 3 or 4) on the back of ...