I just got an MXR carbon copy today (it was $99 on Amazon, which is super cheap). I put a battery in, hooked it up, and plugged it in, but it does not work. The mod switch bright blue light turns on, ...
Question about Roland Music
Need schematic for Boss BR 600 digital recorder. My power input has failed. need value and direction of diode to replace Q47 chip. Internet mod says replace failed Q47 with a 1A/40V diode- socket is ...
...no change. Had installed Fromel Mod, and pilot light shorted out, smoked 2 pilot light wires. Put in new light and wires to it. Can hear drive/more drive, they get good distortion sounds, just ...
...mods etc, but when it comes to boutique and hand wiring an amp from a pcb, there is only three ways of gettting it done... your pal is the man, you do it yourself, or you get super lucky on ebay. I ...
...make your own with a DPDT toggling switch and four 1/4 inch jacks in a box. for each of the two output jacks signal lead, put a 10K resistor to ground to avoid having the outputs "float" during the ...
Question about Fender Music
...midrange control. very easy mods. check the master volume pot, is it a B100K? pull it and put an A250k in its place for better volume control. bias pots , etc. check my website
...subsonic) because they are more omnidirectional and thus more easily easily can loop between input (the guitar pickup, especially on a hollow-body guitar) and output (the speaker). The screech ...
9 questions posted
Usually answered in minutes!
50 Questions
24 Questions
20 Questions
19 Questions
16 Questions