Olympus P 400 Thermal Printer "trying print 8x10 photo image" Questions

...print 8X10 inch pictures - using Adobe Elements 6 - my Canon PIXMA IP5200 will only print 9 5/8 X 7 ll/16 inch images. How can I adjust my printer so it will print the correct size? no worries, check ...

PHOTO TRAY CONSISTANTLY PRINTS PHOTOS NORMALLY. MOST PHOTOS PRINTED FROM THE BOTTOM TRAY (8X10 OR 5X7) COME OUT WITH LINES THROGH THE PICTURE, "NEGATIVE LOOKING", DISTORTED QUALITY, OR JUST NOT AT ALL

...8X10 or whatever, and then I print it, the size is always altered. I've tried making the canvas be the size of the paper, then making the image the desired proportions but it still alters the size. ...

...print photo out to 11x14. I dont' care if it takes two 8x10 pages. I could do this with my old HP but can't with my Epson. Even if I customize the settings. First use a photo processing programme ...

...print pics from the same source using 8x10 HP photo paper , it works just fine except for the image being in reverse. I am frustrated. Hello, When you go to print something next time, click on ...

...trying to print it on an 8x10-inch paper, the printer will adjust the longer side to 10 inches. Hence the shorter side will become less than 8 inches. This will lead to white border on the shorter ...

...8x10 photo image - the printer will "jam" (I use quotes because the printer does not appear to think it's jammed - rather it thinks it is done). It always happens when the job is about 90% complete. ...

...8x10 photos on cardstock until about 4-6 months ago. I would open the back, and the printed sheets would roll out the back. Now, the printer jams if I open the back but it still pulls paper through ...

...8x10 photos have half a blue tint and half a yellow tint. I cleaned the heads and aligned the print cartridges and that didn't make a difference. Working with a HP2610. Thanks! Leslie Step 1 - Check ...

...print 10 full pages of that color, 8x10 image. This is enough to remove the ink from the tube. Don't get the tubes and bottles mixed up when you put the tube back into the ink.. Continue printing. ...