...support. How can the output on the DVR be changed when you can't see the screen to get to the menu choices check to see if the output is set to 480i. HDMI does not support 480i - ...
cable box. The picture looks ok, but there are a few problems with the screen. I would like to view non-HD channels in wide screen format, but this stretches the screen vertically so much that I can't
Question about Samsung LN Televison & Video
...cable. Try thisMethod one- with set on, hold down the exit button on the remote for 10 seconds. It will bring up the warning it will reset to the defaults it had when removed from the box and ...
...Tuner signal board it is shorted and have intermitten dying parts on the tv Tuner signal board.Only choice now is tries buy a refurbish tv Tuner signal board for the replcement.Tries websites like ...
Question about Samsung LN Televison & Video
CABLE to PC to HDMI BluRay TO AV to CAMCORDER all on its own. The red light would flicker constantly, as if the remote is being used, but that is not the case. I cannot use my TV remote. Whenever this
...choice is a HDMI cable. Next best is Component video (3 plugs on each end - red, green and blue) with a two RCA plug audio cable (white and red). Next choice is composite or s-video (one plug, ...
Question about Sylvania Televison & Video
...cable signal into the tv, turn on the external speaker option and then use the out going leads to send the signal to your speakers. There may also be a signal input/output choice in your tv settings. ...
...cable to the 'antenna' connector on the TV. Set the input menu choice to 'cable' and scan for available channels. Your cable company *may* require a box between the cable and the TV. Check with
Question about Dynex Televison & Video
...choice is "greyed" out so it cannot be chosen. Tried to reset TV, unplugged it, etc. If you are connected to a cable box the CCD is enabled by the cable box using the cable box remote or in the cable ...
...signal indicator when I connect cable. Cable checksok You need to go into the TV menu, locate where choices for choosing incoming signals are, and choose the cable option, so the TV knows that it is ...
19 questions posted
Usually answered in minutes!
357 Questions
285 Questions
270 Questions
256 Questions
175 Questions