Bushnell Guardian 26-4202 Monocular "change" Questions

where is the transmission filter housed Most transmission filters are in the transition and changed when you do an oil change for the transmission .

MK 208 Assembly Hi, What is the website where the manual is located? http://www.opticsplus.net/ have had pvs-4 gen 3 for a few years and worked great; but after changing batteries one night, it won't ...

...problem be? It could be a number of things from the bands need adjusting to your fluid needs to be changed along with the filter. I would start by having a certified mechanic drain and refill the ...

...should be able to get you one. You can make your own by using an head light. Get an IR bulb, or change the lens to IR lens. If you want to high tech then get head light will IR LED's. If the ...

-sw's-on/off/IR-control board (microprocessor)---ccfl (cold cathode fluorescent lamp) inverter (changes DC voltage tow switching DC (such as on/off/on/off/on/off but at a much faster pace (20Khz)-

no Picture I have the Bushnell 26-4202. The power light shows on but there is no picture. I have changed the batteries and still no picture. It have never been exposed to moisture. image tube is ...

change battery how long does it

what is wrong with my car/ car will run fine for a while,then it wont start,cranks no fire. wait alittle while and it will start and run fine. changed fuel pump,crank sensor,fuel reg,filter. (no codes

scope comes on for a few seconds then turns off, then may not come on at all. Put new batteries in the unit no change. this could be a bad component inside the unit or a bad solder joint in the unit