DFI KM400MLV KM400 AUDIO/Video/LAN/USB/SATA/RAID/333FSB Athlon XP Motherboard "change raid settings" Questions

RAID. change both hard disk and cd/dvd to IDE configuration. make sure the first boot in the Boot menu is the cd/dvd, where your windows cd installer is inserted. Save the settings by pressing F10 key

set up should be "non-raid". The back up battery on the motherboard is a new one. Go to the BIOS Setup and after changing/updating the new settings, use option Save and Exit. ([email protected]

...RAID. When I change the IDE Configuration back to IDE, my system will boot but will not see the RAID Array. (And yes, I did set the hard drive order to look at the single drive first!) Download the ...

MS-6787 I am installing windows xp on this mobo and when it is done installing the windows xp files, it tells me windows are going to reboot. It hangs on the first boot up screen with the windows logo

...off the RAID in the BIOS. Now I am trying various thigs but still cannot see the HDD's. I have changed the ATA/IDE from Enhanced to legacy and back but no luck. Any ideas? ATA/IDE has nothing to ...

...change. Open the manual to page 2-24. The M1573 RAID function set this to [Disabled]. (This will stop the bios from loading the RAID controller.) See boot menu page 2-31 section 2.6 Set section 2.6.1 ...

...RAID mode or any other mode you would need to change your CMOS settings and configure them as IDE this can only be done in CMOS and if you want these features to be but back when you install windows ...

...master drive, disconnect the data cable to all other drives. Enter your bios. Change the raid setting to Disable or to SATA. Save & exit. Load your Windows CD. Format & install. Cheers! ...

...him. Dont want to do RAID You need to enter the bios. Use the M2N-E SLI manual to help make some changes. Start up the PC & begin to press the Delete key every two seconds. Doing this will open

...see if the bios detects it, also check if there are any jumpers on the disk and if they have been ...