hot iron and creating steam. I shut off he water and turned off the ice maker. The back of the freezer wall is now cold and the freezer works fine. Do I need to replace the ice maker. The model number
...hot, I am sorry but your compressor is bad. Replace the overload/relay which is plugged onto the side of the compressor . Easily replaceable with only 2 or 3 wires . Take your model number so you get ...
...hot, replace the timer. If not getting hot, unplug the frig and check the resistance across the defrost timer(should be a closed curcit when cold) and across the heater. If "0" resistance, replace ...
...fan. Check the condenser fan at the compressor. Is it running? If no, is compressor hot? If compressor is hot replace condenser fan motor. If compressor is not hot. Replace the compressor start
Question about Kenmore Refrigerators
...hot to the touch then the heaters are going bad and must be replaced. You can replace it yourself by removing the door seals, and then removing the heating element that runs the whole door. When you ...
transformer replacement I need instructions on replacing a transformer (9760588). primary side = voltage being supplied to transformer......secondary side = voltage output on transformer. hot line to ...
Ok so I have a ge cafe. I recently replaced the motherboard as my controls were all messed up and it was not cooling. Afterwards it worked fine except that there was a howling noise inside of the unit
Question about GE Refrigerators
replaced the condensor fan on my GE side by side refrigerator, but it's not turning on and the divider is getting hot. How long after replaceing this is it supposed to kick on? replaced the ...
...floor when I dispensed water. Thanks Compressor will be hot to the touch. You stated the fan was replaced and then said the fan is not cooling. If you replaced the fan and it is now operating, ...
672 questions posted
Usually answered in minutes!
277 Questions
187 Questions
180 Questions
61 Questions
66 Questions