Directv HR10-250 DTV Receiver "heat" Questions

Ad

Question about Dedicated Micros Televison & Video

2 Answers

restart it is o.k for a short while... if any one can help i would be gratefull... thanks eddy over heating / bad cooling fan or hard drive If the system is old I.E not had its fans changed in 2 years

Ad

Question about Televison & Video

1 Answer

...turn itself off? If you can, take it outside and blow the dust out of it with a leaf blower! The heat created by dust and lint will create a large amount of heat and cause the receiver to shut

Ad

Digital Sprite 2 screen freezes, reboot good for a few hours then freezes again. check the system fans they need changing every 2 years. check the hard drive-s are not over heating should be changed ...

Question about Directv Televison & Video

2 Answers

...spray, hit each of the microprocessors and see which one eliminates the problem and either reapply heat sink paste or make sure proper contact with the heat sink is possible. It could be 6.3a or b, ...

Question about Dedicated Micros Televison & Video

2 Answers

...about their power requirements. Have you checked the system fans and hard drives as it maybe over heating. the fans don't last long around 15000hrs and stop cooling the system, that makes the hard ...

...thank you david replace the hot and the flyback and dvr601 602 and 603 make shure your yousing heat sink on the

visco TV over heating Seems to be ok for a long period of time after cooling off but seems to go ot sooner when used as a "Gaming"TV Is this TV still new and under warranty? You should not be having ...

Question about Dedicated Micros Televison & Video

1 Answer

what is fault code 6109 it is system error. if it is no causing any faults in recording or play back check the psu. fan should be working all the time. not intermittent. also check the hard drive/s ...

I have to heat the tv at the back with a hair dryer before it comes on OMG. Accident waiting to happen....don't do that first of all.buy a new tv before before your blow dryer blows you up!

...on The problem is a Diode on the corner of the board, location D620, Part #1N4005. To verify this heat the diode up a little with a hair dryer or a soldering iron, ( DO NOT OVER HEAT)! to see if

Not finding what you are looking for?
Directv HR10-250 DTV Receiver Logo

26 questions posted

Ask a Question

Usually answered in minutes!

Top Directv Televison & Video Experts

Alexander

Level 2 Expert

171 Answers

Ngoro

Level 3 Expert

3523 Answers

john h

Level 3 Expert

29494 Answers

Are you a Directv Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...