NetGear WNDAP330 (WNDAP330-100AUS) Pre-802.11n Wireless Access Point "reset work" Questions

reset button at the back but it still not work...The LED for Power & Link is ON, but for ACT LED is OFF even I was connected to Modem. Please help me! Thank You... you must unplug your modem first

factory reset Reset via Reset button isn't working! Are they ways to do this in another way? Press and hold for 30 seconds or so, release. Take a look at this procedure: ...

...reset it, it was expected to work having 192.168.0.50 as the Gateway. I plugged an ethernet cable, and oddly it gave my computer an IP I had never seen before: It was 198.254.200.53 . I never used ...

I need to factory reset a Siemens AP2620 I think I stuck a couple AP's in a non-working Vlan. I can no longer ping the AP's. If I can reset them to factory defaults though, I can get the system back ...

...work. You can now change all the settings you wish to. Hope this Helps Admin CCNA, CCSP, MCSA if you look at the back of your access point you should see a reset button. Hold that in for about 30 ...

...properly. but i am not able to connect and configure by defauult ip address 192.168.1.1. before reset the device was accessing by 192.168.1.1 but not working. after reset it is working but not ...

password admin is not working there maybe a reset button on the back of the AP. If so power up the AP and press this reset button for a few seconds then release the button and it should be reset to ...

...reset. Make sure that the adapter is not at fault. Use a different one. If that would not work, you need to repair router. Thanks. If the router does not power up, it is probably dead. IMHO the best ...

...all 4 ports checked the wireless button Try it Reset by reset button or through gateway may it will be work. I have only encountered 3 failed wireless routers. They were all Linksys. Try a new

i have forgotten my user id & password. how do i reset the router on default? i have buffalo airstation N150.i did reset also twice thrice times but still cant find the solution to reset new ...