Cisco SG200-26 24 10/100/1000 Ports, Gigabit Ethernet Smart Switch, 2 Combo Mini-GBIC Ports "reset port switch" Questions

...reset the switch completely. There is a reset pin hole next to the power switch. Hold it in with a paper clip for at least 30 seconds. ( I was holding in the power button for 30 seconds.)Then you can ...

Hi do you know how to find the IP address of a cisco sg200-50p or to reset to factory IP address? The power light is solid so it must have a static IP but nobody knows what it is. Thanks To find the ...

i go and get a new router how do i reset router / dynex 5 port 10/100m router very small button near ports mine is small square buttong SOME are inset hole you push a paper clip into hole for reset eh

port ethernet switch. The problem is that when I plug 3 pcs of rj45 cables (2 workstations, 1 from my router), they don't have any connectivity between them. Can't get even them to work. Sometimes the

...reset a Zyxel pla470 4-port switch? There is no reset button on this model as there is with the PLA470 v2 version. Hubs normally don't have a reset. Allthogh this one has a encrypt option button. Jus ...

port settings at 9600/8/N/1/N (. When the screen comes up blank with a blinking cursor, hit [enter] once or twice to bring up a login prompt. Alternative to 1 and 2 above, if there is a known assigned

...is corrupted There is no reset button on the back if there is console port, connect via putty software and do a command base ...

how can i factory reset switch 4500g pwr-24 port There is typically a small reset button on the switch. Press and hold that for about 30 seconds.

forgot password how do i reset password You may have to reset the switch to the factory default configuration. There is a procedure for this in the manual for the switch.

...port switch, And im wanting to know how to reset it. Any direction would be much appreciated. 1-With the unit on, place a paper clip into the hole on the back of the unit labeled Reset. 2-Hold paper ...