Canon Pixma MX360 Printer "fax line send receive faxes" Questions

...fax line I have tried everything to fax and recieve faxes can you please let me know what settings this machine should be in. Thanks! Check out the Easy Setup Instructions available here. If you can ...

...faxes, there not even stored in memory. Can't send out a fax always get message that it's busy. You have connected the phone line, right? Checked the phone line with a phone and you get a dial

...Mp780. If we try to send a fax we get a busy signal, we also get a busy signal if we call the fax #. It is a dedicated line. Thanks for the help. hello dmhertz anything here that may help Canon .

...line for FAX use only. MANUAL MODE: When you receive mainly voice calls and sometimes faxes, or want to receive faxes manually. ANS MACHINE MODE: When you want to receive voice messages on your ...

...line) -I have tested sending a fax, and can -I have reduced the RX speed to 7200. Nothing I try even will get the machine to ring. I previously had a pixma mx850 and had the same problem. I need some ...

...NOT send a fax. First check the phone line it is ok,second try to put another printer with fax on that line and try to look if is work the fax.Fax board may be defective,try to change the fax

line or you need to set up your fax machine for proper receive mode. Contact your phone service provider to see if they support faxes. (Faxes cannot handle nearly as much compression as standard voice

...line for your phone and for your fax that your phone will ring when receiving a fax, if you answer it will ruin the fax, there is a special configuration you can access which will let your printer ...

send, and to print received faxes. If you have all this connected already and you can't receive, check your incoming telephone line and fax software settings to be sure the line is answering correctly

...line. You cannot receive fax using this printer, because this printer doesn't support fax sending/receiving. Only fax supported printers can receive fax documents. You will know if a printer is ...